Q4 TASMAN Series 2

          Q4 TASMAN Series 2 – Ready-to-Use Benchtop Metals Analyzer

          Continuous Development

          Just as the development on the metals side progresses, Bruker continuously drives the improvement of innovative solutions that let you achieve your goals faster, more reliably, and more cost-effectively than before. The new Q4 TASMAN Series 2 is the latest result of our striving for perfection.

          Analytical Performance

          The analytical range of the Q4 TASMAN Series 2 has been extended for many elements, and new element sets enable the analysis of new alloy types. Addressing the entire metals market, dedicated Analytical Solution Packages (ASPs) are available for all ten common metal bases: Fe, Al, Cu, Ni, Co, Pb, Sn, Zn, Mg, and Ti. ASPs include full element sets, calibrations, alloy groups, and standardization samples. ASPs provide analytical performance that’s precisely tuned for the metals world - and its future demands.

          SmartSparkTM – Advanced Digital Spark Source

          The optimized digital spark source in the Q4 TASMAN Series 2 contributes to improved analytical precision and shorter time-to-result. Matrix-optimized, high-energy pre-sparking is applied to homogenize the sample surface, reducing matrix effects and increasing accuracy. In conjunction with an optimized co-axial argon flow design in the spark stand, SmartSparkTM delivers improved long-term stability with lower argon consumption.

          Spark Stand with Flexibility Built-In The low-maintenance spark stand is freely accessible from three sides and equipped with a large and robust sample stage. The unique, pneumatically driven sample clamp supports sample heights of up to 120 mm while ensuring convenient sample handling with improved operational safety.

          MultiVisionTM – The Optimal Solution for Your Applications For optimal resolution of challenging analytical emission lines in respective ranges, two dedicated optical systems are employed. The innovative dual optics concept also allows the optimal choice between three variants to fulfill individual analytical needs, increased reliability, and reduced cost of ownership due to low argon gas consumption.

          The Q4 TASMAN Series 2 provides the answers you need fast, using proven state-of-the-art technologies. Particularly in combination with the new version of ELEMENTAL.SUITE software, the Q4 TASMAN Series 2 lets you achieve results faster, easier, and more cost-effectively than ever before.

          Register for the Webinar on the new Q4 TASMAN Series 2, taking place on December 10, 2020.

          Download the new Q4 TASMAN Brochure

          MultiVision - Superior, direct light coupling into the high efficiency vacuum UV optics with small inner volume
          MultiVision - Superior, direct light coupling into the high efficiency vacuum UV optics with small inner volume
          Q4 TASMAN Series 2: Outstanding solution for all metal analysis needs
          Q4 TASMAN Series 2: Outstanding solution for all metal analysis needs.
          Co-axial argon flow: reduced consumption with minimized maintenance
          Co-axial argon flow: reduced consumption with minimized maintenance.
          Achieving results faster, easier, and more cost-effectively than ever before
          Achieving results faster, easier, and more cost-effectively than ever before.
          Transmission through an optical fiber transfers emitted light into the no-purge UV/VIS optics
          Transmission through an optical fiber transfers emitted light into the no-purge UV/VIS optics

          Overview of Benefits and Features

          Specification

          Spark Stand

          Sample clamp

          Low-maintenance spark stand with co-axial argon flow, large and robust sample stage, accessible from 3 sides

          Pneumatically driven, 120 mm height
          SmartSparkTMOptimized digital spark source for stable spark generation up to 1,000 Hz
          MultiVisionTM
          Optical System

          VUV Optics

          UV/VIS Optics

          Dual optics concept with robust Paschen Runge mount, multi-chip systems with temperature stabilization

          130 - 200 nm, Ar-purged

          190 - 620 nm, no purge

          Models

          Q4 TASMAN 130

          Q4 TASMAN 170

          Q4 TASMAN 200

          l: 130 - 620 nm

          l: 170 - 620 nm

          l: 200 - 620 nm
          Electrical Data100 – 204 V (± 10%), 50-60 Hz
          16 A (240 V) or 25 A (100 V) slow blow fuse
          600 W measurement, 50 W standby
          Dimensions and Weights54 x 80*) x 60 cm (W x D x H), ~75 kg

          *) 90 cm with optional active thermal control system

           

           

           

          Benefit

          Minimized maintenance and argon consumption, easy analysis of wires and small pieces but also accepting bulky samples

          Hassle-free sample handling and improved operational safety
          Improved precision and stability
          Optimal choice between 3 variants to fulfill individual analytical needs

          Outstanding performance with high resolution and low argon consumption

          Reliability meets low cost of ownership

          Best performance for N and O

          Full capabilities incl. C, P, S, Sb, Te

          Mastering non-ferrous metals analysis
          Compatible with all worldwide power and current configurations
          Compact benchtop system

          The new Q4 TASMAN Series 2 is a versatile, high-performance spark-OES combining reliability and outstanding analytical performance with low cost of ownership.

          Applications

          • Iron and steel (Fe), and its alloys
          • Aluminum (Al), and its alloys
          • Copper (Cu), and its alloys
          • Nickel (Ni), and its alloys
          • Cobalt (Co), and its alloys
          • Magnesium (Mg), and its alloys
          • Lead (Pb), and its alloys
          • Tin (Sn), and its alloys
          • Titanium (Ti), and its alloys
          • Zinc (Zn), and its alloys

          Inspection of small pieces made easy

          As part of the incoming inspection, users are often confronted with analysis on small components or semi-finished products. Tubes, wires, and fittings are often difficult to handle on a spark spectrometer.

          The co-axial argon flow directs the gas where it is needed: at the burn spot. This eliminates the need for a standby gas flow and simplifies the analysis of small samples. A comprehensive set of adapter kits is available for the analysis of small pieces, tubes, wires, and sheets. These adapters address the specific challenges of an optimal positioning over the electrode, while adjusting tightness to samples of different shapes and sizes. Another option reduces the size of the spark stand opening by using ceramic inserts, allowing the direct measurement of samples with dimensions down to 6 mm.

          Available services include

          • Help desk support from highly-skilled troubleshooting professionals, to isolate and resolve hard- and software problems
          • Web-based remote instrument service for service diagnosis and applications support
          • Merged reality support with Help Lightning – a virtual engineer at your side (video)
          • Planned maintenance, according to your requirement
          • Customer on-site repair and maintenance service
          • Spare parts availability typically over night or within a few working days worldwide
          • Compliance services for installation qualification, operational qualification / performance verification
          • Site planning and relocation

          Bruker Support

          On our support website you will find:

          • Software Updates
            System software updates are available online to registered users.

          • Documentation
            Product manuals and installation guides are available online to registered users.
          日本的色情高清在线看,免费一级a毛片,在线播放,亚洲欧美色av免费视频在线观看,色在线视频亚洲欧美,